Sisis at R.T. Machinery
Turf maintenance products
Synthetic surface maintenance products
Turf Maintenance
Tractor mounted deep slitters
Deep slitting aerators give deep, clean penetration with
minimal surface disturbance.
Mega Slit
- Choice of interchangeable slitting tines to suit different ground conditions.
- The angle of the tines and spiral design of tine shaft assist penetration giving
maximum underground cultivation with minimum surface disturbance.
- Tine plates have a wide rim to reduce marking in soft or undulating conditions.
- Safety guard is quickly removed for easy tine change.
- Standard cat.1, 3-point linkage.
- Simple design for low maintenance.
Maxi Slit
- Choice of interchangeable slitting tines to suit different ground conditions.
- The angle of the tines and spiral design of tine shaft assist penetration giving
maximum underground cultivation with minimum surface disturbance.
- Tine plates have a wide rim to reduce marking in soft or undulating conditions.
- Safety guard is quickly removed for easy tine change.
- Standard cat.1, 3-point linkage.
- Simple design for low maintenance.
Multi slit
- Choice of interchangeable slitting tines to suit different ground conditions.
- The angle of the tines and spiral design of tine shaft assist penetration giving
maximum underground cultivation with minimum surface disturbance.
- Tine plates have a wide rim to reduce marking in soft or undulating conditions.
- Standard cat.1, 3-point linkage.
- Simple design for low maintenance.
- Can be used with most trucksters by use of a Variable Pressure Frame.
Auto Slit
 Deep slitter suitable for use on fine or outfield turf. Deep
clean slitting action with minimal surface marking.
- Choice of interchangeable slitting tines to suit different ground conditions.
- The angle of the tines and spiral design of tine shaft assist penetration giving
maximum underground cultivation with minimum surface disturbance.
- Tine plates have a wide rim to reduce marking in soft or undulating conditions.
- Safety guard is quickly removed for easy tine change.
- For ease of use, and to comply with EU lifting regulations, the patented design
uses a cantilever system to lift the machine out of work.
- Incorporates rear smoothing roller.
Tractor mounted Aerators
Multitiner 1.8
 Tractor mounted drum-type aerator for use on fine turf.
- Three drums with independent rotation, total width 1.8m.
- Choice of interchangeable tines with a maximum working depth of 100mm (4ins).
- Quick release pins and clips for rapid tine change.
- Standard cat. 1, 3-point linkage for use on most compact tractors.
- Simple design for low maintenance.
- Guards are easily removed.
- Roller, fitted as standard can be used for extra weight in hard conditions.
- Tractor power requirement - 30hp minimum.
Multitiner 1.2
 Tractor mounted drum-type aerator for use on fine turf. Also
suitable for use on outfield turf such as soccer pitches.
- Choice of interchangeable tines Max working depth of 100mm (4 ins).
- Quick-release pins and clips for rapid tine change Integral weight bar for additional
weights if required.
- Rear spring-loaded pressure roller fitted as standard, 1.2m wide.
- Standard cat.1. 3-point linkage for use on most compact tractors.
- Can also be adapted to fit most trucksters.
- Simple design for low maintenance.
- Tractor power requirement - 30hp minimum.
Mounted Rolaspike
 Tractor mounted
Sarel type roller.
- 180cm wide Sarel type roller.
- Working depth of up to 50mm.
- Three rotating drums on one shaft.
- Fast forward speed for excellent productivity.
- Can be fitted to the SISIS Single Play, Twin Play, Quadraplay for fitting to the
tractor 3 point linkage.
- Tractor power requirement - 30hp minimum.
Javelin Aer-Aid 1500
 Vertical action, air-injection aerator for fine
and outfield turf.
- Minimal Surface Disturbance Depth is infinitely variable to a maximum
of 127mm (5ins).
- Quick, single-lever depth setting for easy adjustment.
- Cam trigger mechanism ensures that the air is always expelled at
the bottom of the tine penetration, enabling treatment to be targeted
precisely and consistently.
- Working at 75mm (3ins) spacing, air is introduced at a rate of 88 litres
(3cu.ft.) per minute.
- The air injection tines are specially designed to use the maximum air
available from the compressor which produces clean, fresh air at a
constant rate.
- Tipped tines for extra durability.
- Alternative tines for other operations such as hollow coring prior to top
dressing.
- Wide working width.
- Fast forward speed for excellent productivity.
- Minimal maintenance – all bearings fully sealed and no grease
nipples in the drive system.
- Quiet in operation.
- Quality British made Compair compressor.
- Tractor power requirement - 30hp minimum.
Powered Aerators
Arrow Aer-Aid
 Independently powered vertical-action
air-injection aerator.
- Working width 600mm.
- Wide range of interchangeable tines.
- Up to 12.5cm (5ins) working depth.
- Variable tine spacing.
- Minimal surface disturbance.
- Reliable B&S 13hp engine.
- Assisted lift for easy operation.
- Independent disengagement of tine drive.
- Vibration reducing handles.
- Quality British made Compair compressor.
Arrow
 Powered, vertical-action aerator.
- Working width 600mm.
- Wide range of interchangeable tines.
- Up to 12.5cm (5ins) working depth.
- Variable tine spacing.
- Minimal surface disturbance.
- Reliable B&S 10hp engine.
- Assisted lift for easy operation.
- Independent disengagement of tine drive.
- Vibration reducing handles.
- Complies with all EU safety regulations.
Supaturfman
 Independently powered, heavy duty aerator for bowling
greens, tennis courts, cricket squares etc.
- 100mm depth with minimal surface disturbance.
- Working depth of 10cm (4 ins) max.
- Choice of interchangeable tines.
- Pivoted tine bar for vertical penetration and withdrawal
without surface disturbance.
- 6.5hp engine.
- Will also operate on spiker-slitter.
- Supplied with transport trolley.
Dart
 Independently powered vertical action aerator for
bowling greens, tennis courts, cricket squares etc.
- Working depth of 100mm (4 ins) max.
- Wide range of interchangeable tines.
- Clean, vertical penetration and withdrawal without
surface disturbance.
- All controls, including balanced depth control, adjustable
from operating position.
- “Easy lift” system for effortless turning and transport
- Designed for ease of handling.
- Minimal maintenance with sealed bearings and easily
removed cover.
- Effortless depth selection with clearly visible indicator.
- 100mm depth with minimal surface disturbance.
Powered Scarifiers
Auto Rotorake Mk.5
 Heavy duty scarifier for removal and control
of thatch on fine and other quality turf.
- Working width of 50cm (20ins).
- Cutting reel safety brake.
- Contra-rotating reel with specially designed tipped blades for clean,
consistent cut and maximum thatch removal.
- Alternative blades for light scarifying.
- Optional Brush Reels, Rolaspike Reel.
- Depth of cut adjustment control is mounted on the handle to enable
depth to be set whilst moving forwards.
- User-friendly, operator presence controls designed for maximum
operator safety.
- Easy-fit collector box.
- 6.5hp petrol engine with independent drive to wheels and reel.
- Careful weight distribution, slick tyres and full differential ensure
ease of turning and minimal surface marking.
- Optional artifical surface Brush Reels.
Rotorake 450
 Scarifier with power to the reel and assisted drive to the
rear tyres, for removal and control of thatch on fine turf.
- Working width of 46cm (18 ins).
- Contra-rotating reel with blades spaced at 1.8cm (3/4in) for clean,
consistent cut.
- Choice of reels for year-round use.
- O.P.C. controls for operator safety.
- Depth of cut adjustment control is mounted on the handle to enable
depth to be set whilst moving forwards.
- Collector box.
- 4hp petrol engine.
- Optional artifical surface Brush Reels.
Rotorake 602 & 602S
 Heavy Duty Powered Scarifier, de-thatcher
and Linear Aerator. Seeder option available.
- Working depth of 50mm (2 ins) max.
- Working width of 60cm (24 ins).
- Contra-rotating reel for clean, consistent cut.
- Front or rear discharge.
- Choice of blades, with variable spacing, for year-round use.
- Tungsten tips are 25mm long for a longer working life.
- 6 forward speeds for efficiency under varying conditions & depths.
- Reverse gear for manoeuvrability.
- O.P.C. controls for operator safety.
- New box design.
- Powerful 14hp V twin petrol engine for smooth running and low
vibration, with independent drive to wheels and reel.
Tractor Mounted Scarifiers
Veemo Mk2
 A purpose designed, heavy duty scarifier using strong
cutting blades for maximum thatch removal with
minimum surface disturbance.
- Improved chassis design incorporating pivoted rear section and support
wheels at front.
- Efficient hydraulic system with large volume tank, fewer pipe connections
and stainless steel braided flexible pipes for improved heat dissipation.
- Direct drive to tine shaft via hydraulic motors mounted on scarifying units.
- Extra durable tungsten tipped, hook blades with variable spacing.
- Improved depth setting incorporating locking micro-adjusters on each unit.
- Blades new registered design.
- Tractor power requirement - 30hp minimum.
Rotorake TM1000
 Combined de-thatcher and Linear Aerator with collection.
- Floating unit to follow ground contours.
- Fast ground coverage.
- Interchangeable blades and optional variable spacing.
- Quick, simple depth setting without tools to max. 50mm.
- Contra-rotation of reel throws debris forward for clean,
consistent groove.
- Standard Cat.1, 3-point linkage.
- Collector box for use when working to depth of 25mm.
- When used without collector box, scarifying unit can be offset
so that wheels do not run over the removed thatch.
Tractor Mounted Sweepers
Litamina 1200 & 1500
 Compact sweeper/collector for collecting all types of
surface debris from fine turf and outfield turf.
- Collects wide range of materials incl. leaves, pine needles, grass
clippings, thatch, cores, litter.
- Spiral design brush for effective collection.
- Follows ground contours.
- Simple brush adjustment without tools.
- Large capacity hopper.
- Hydraulic tip facility for easy emptying.
- Useful for occasional use on paths and car parks.
- Mesh hopper model for use on synthetic turf.
- Standard cat 1, 3-point linkage, PTO drive.
- Tractor power requirement 1200 - 25hp minimum.
- Tractor power requirement 1500 - 30hp minimum.
Litamisa 1800
 Tractor mounted sweeper and collector for collecting
all types of surface debris from large areas.
- Collects wide range of materials incl. leaves, pine needles, grass
clippings, thatch, cores, litter.
- Spiral design brush for improved collection.
- Follows ground contours.
- Simple brush adjustment without tools.
- Large capacity hopper.
- Hi-tip facility.
- Useful for occasional use on paths and car parks.
- Standard cat 1, 3-point linkage, PTO drive.
- Tractor power requirement 1800 - 45hp minimum.
Spreaders & Top Dressers
Powaspred
 Top dresser which spreads a wide range of materials, at the desired rate,
with an even consistent spread.
- Infinitely variable spreading rates.
- Accurate placement.
- Oscillating base plate to reduce bridging.
- Rotating brush at point of discharge to ensure even spread.
- 540 PTO drive from tractor.
- Cable controls for material shut-off from tractor.
- Handles with ease wide variety of materials even when damp,
especially sand based dressings.
- Wheeled version has 4 turf-tyres on a twin axle to avoid marking
and to spread load on fine turf.
Autospred
 Combined de-thatcher and Linear Aerator with collection.
- Infinitely variable spreading rates.
- Oscillating base plate to reduce bridging.
- Rotating brush at point of discharge to ensure even spread.
- Slick tyres to avoid marking on fine turf.
- OPC controls for safe, easy handling.
- Hydrostatic drive for manoeuvrability.
- Compact size for areas with restricted access, and for convenient. storage.
- Independently powered – no tractor required.
Truspred
 Hand Operated Spreader and Top Dresser.
- Simple to set spreading rates.
- Ribbed rubber conveyor belt for accurate placement.
- Marker to avoid gaps or overlapping.
- Carrier wheels permit spread right to the edge of bowling greens.
- Rubber tyres to minimise marking.
Variseeder 1300
 Versatile Tractor Mounted Seeder.
- Seeding rate is variable and is simple and accurate to set by
Zero-Max box.
- Fast work rate.
- Overseeding carried out without taking ground out of play.
- Studded roller creates seed bed.
- Low maintenance with few wearing parts.
- Integral weight bar.
- Standard cat.1, 3-point linkage for use on most compact tractors.
- Can be adapted for use with most common power units for golf
course and sports ground work.
- An Ultra Fine seed roller is available for sowing pure bents.
- Storage trolley.
- Two discharge roller options for all types of seed.
- Standard for rye and bent/fescue mixes.
- Ultra fine for pure bents.
Combination Implement Frames
 Single pass maintenance system incorporates a mounted
frame which accepts a variety of different implements for
use on both turf and hard porous surfaces.
- Versatile – can be used on natural turf, synthetic turf and
hard porous surfaces.
- Fast – Up to four operations carried out simultaneously.
- Agri-jacks allow implements to be used lightly or more
aggressively as required.
- 183cm and 244cm working widths available.
- Quadraplay has carrying platform for hand tools, seed etc.
- Connects to any tractor with 3-point linkage and utility
trucks with suitable frame.
- Robustly constructed and very low maintenance.
  
Tractor Mounted Brushes
Osca 3
 Tractor mounted oscillating brush.
- Equally effective on natural and synthetic turf.
- Aggressive brushing action disperses top dressing quickly and evenly,
preventing excess material being left on the surface where it could
contribute to disease.
- On synthetic surfaces, keeps infill mobile, preventing surface
compaction and loss of porosity.
- On synthetic surfaces, maintains infill level at a constant depth, giving
consistent playing characteristics, and preventing pill damage caused
by reduced infill levels.
- Uses fewer passes than conventional drag brushes, causing less
compaction.
- Option of using any 1.8m implements from mounted frame options
using twin implement extension arm kit.
- Storage frame is supplied as standard.
Flexibrush
 Tractor mounted brush.
- Equally effective on natural and sand filled synthetic turf.
- 5.35m wide working width.
- Brush sections float to follow ground contours.
- Outer sections fold for transport and storage.
Varibrush
 Tractor mounted multiple-action brush.
- Equally effective on natural and synthetic turf.
- Multiple action means fewer passes and therefore reduced compaction.
- Easy to handle and attach.
- Drawbar is adjustable for towing height and length.
- Brush frame is reversible to allow for brush wear.
- 1.85m wide working width.
- Three versions are available:
- 3-point mounted for tractors & trucksters (adaptor frame required).
- Manual lift towing frame & ball hitch.
- Electric lift towing frame & ball hitch.
Synthetic surface maintenance products
Litamina 1200 & 1500
Compact sweeper/collector for collecting all types of
surface debris from fine turf and outfield turf.
- Collects wide range of materials incl. leaves, pine needles, grass
clippings, thatch, cores, litter.
- Spiral design brush for effective collection.
- Follows ground contours.
- Simple brush adjustment without tools.
- Large capacity hopper.
- Hydraulic tip facility for easy emptying.
- Useful for occasional use on paths and car parks.
- Mesh hopper model for use on synthetic turf.
- Standard cat 1, 3-point linkage, PTO drive.
- Tractor power requirement 1200 - 25hp minimum.
- Tractor power requirement 1500 - 30hp minimum.
Litamisa 1800
Tractor mounted sweeper and collector for collecting
all types of surface debris from large areas.
- Collects wide range of materials incl. leaves, pine needles, grass
clippings, thatch, cores, litter.
- Spiral design brush for improved collection.
- Follows ground contours.
- Simple brush adjustment without tools.
- Large capacity hopper.
- Hi-tip facility.
- Useful for occasional use on paths and car parks.
- Standard cat 1, 3-point linkage, PTO drive.
- Tractor power requirement 1800 - 45hp minimum.
SSS1000
A rotary brush for use on artificial turf surfaces to
remove surface debris, lift the pile and redistribute
sand or rubber crumb infill giving your surface
maximum performance and life.
- Aluminium hopper with stainless steel mesh for long life.
- Adjustable drawbar which lifts upright for easy storage.
- Hopper quickly removed for emptying.
- Fast workrate keeping surfaces in play.
- Wheel drive to the brush is disengaged by simple “pull & twist”
clutch levers on each wheel for transport between sites.
- Adjustable brush to increase/decrease ground engagement and
to allow for brush wear.
- Robustly constructed and low maintenance.
- Tractor power requirement - 12hp minimum.
Towed Implement Frame
 Designed specifically for daily maintenance of artificial
surfaces, keeping it in good playing condition and
maximising surface life. Ideal for towing behind small
compact garden tractors.
- Implements can be used singly, or in pairs.
- Enables Quadraplay implements to be used even when
hydraulic lift is not available.
- Specific 1.2m implements.
Option
Electric winch lift option for easy lifting without getting off
the power unit.
Osca 3
Tractor mounted oscillating brush.
- Equally effective on natural and synthetic turf.
- Aggressive brushing action disperses top dressing quickly and evenly,
preventing excess material being left on the surface where it could
contribute to disease.
- On synthetic surfaces, keeps infill mobile, preventing surface
compaction and loss of porosity.
- On synthetic surfaces, maintains infill level at a constant depth, giving
consistent playing characteristics, and preventing pill damage caused
by reduced infill levels.
- Uses fewer passes than conventional drag brushes, causing less
compaction.
- Option of using any 1.8m implements from mounted frame options
using twin implement extension arm kit.
- Storage frame is supplied as standard.
Flexibrush
Tractor mounted brush.
- Equally effective on natural and sand filled synthetic turf.
- 5.35m wide working width.
- Brush sections float to follow ground contours.
- Outer sections fold for transport and storage.
Varibrush
Tractor mounted multiple-action brush.
- Equally effective on natural and synthetic turf.
- Multiple action means fewer passes and therefore reduced compaction.
- Easy to handle and attach.
- Drawbar is adjustable for towing height and length.
- Brush frame is reversible to allow for brush wear.
- 1.85m wide working width.
- Three versions are available:
- 3-point mounted for tractors & trucksters (adaptor frame required).
- Manual lift towing frame & ball hitch.
- Electric lift towing frame & ball hitch.
Robbi
 Ride-on triple brush.
- Equally effective on natural and synthetic turf.
- Specially designed “S” brushes for improved brushing effect.
- Interchangeable brushes for different surfaces and conditions.
- Brushes are ram assisted to hold them to the surface and to fold them
back when not in use.
- Low ground pressure and low centre of gravity to prevent surface damage.
- 1m folded width for ease of access and storage.
- OPC controls for safe, easy handling and accurate control.
- Simple to drive and easy to maintain.
- Fast operation encourages regular use.
- Fold-over seat has suspension springing and carrying box below.
- ROBBI is supplied as standard with one set soft bristles and 1 set medium
bristles.
- LPG gas conversion option.
Rosca
 Ride-on brushing system, comprising a pair of mid-mounted
oscillating brush units and three rear-mounted brushes.
- Specially designed for maintaining synthetic surfaces.
- Ride-on for manoeuvrability and operator convenience.
- Electric start.
- Hydrostatic drive for forward/reverse.
- Oscillating brushes for thorough, periodic brushing.
- Rear mounted brushes for routine, frequent use.
- Outer brushes fold for transport and storage.
- Causes less compaction than conventional drag brushes.
- Rear ball hitch for towing.
- LPG gas conversion option.
|
Grange IT Solutions Ltd