|
Turf Maintenance, Aerators
& Irrigation
|
RTM
Turf Care
A fantastic
range of specialist equipment for Turf care
The 6140 Minor Turf Aerator from RTM
Self propelled sports & lawn turf aerator.
- Solid, hollow or slitting tine options
- Designed for the Professional
- Honda engine
- Easy to manoeuvre & load
- Pneumatic turf tyres
- Low foot print
- Simple to use and maintain
- Simple V-belt drive
- Stainless steel covers and guards
- Garden gate access
- Low noise level
Specifications
- Honda GX120 series 4.5hp engine
- 30cm (12") working width
- 3 tines per bar
- Width: 61cm (24")
- Length: 114cm (45")
- Weight: 120kg
- Working speed 3mph (5kph)
 Click here for RTM Product Range PDF brochure
|
NEW & USED AVAILABLE
|
|
TT
Sarel Spiker (Tractor & Truckster)
|
| Code |
Description |
Price
£ (Ex VAT)
|
|
TT1010 |
Red Cat 1 Mounting Headstock |
395.00 |
|
TT2050 |
TT Sarel Spiker Unit - 2m Mounted |
1,995.00 |
|
TT1050 |
Truckster Mounting Bracket Set |
199.00 |
|
TT1030 |
Spare Cat 1 Mounting Pins (set) |
39.00 |
|
TT2055 |
Spare Spike (includes Nylock Nut) |
3.50 |
|
|
TT
Dragbush, Dragmat and Rake, with mounting Headstock
| Code |
Description |
Price
£ (Ex VAT)
|
|
TT2070 |
TT Dragbrush Attachment |
275.00 |
|
TT2080 |
TT Dragmat Attachment |
395.00 |
|
TT2090 |
TT Rake Attachment |
285.00 |
|
TT1010 |
TT Mounting Headstock (the red part) |
395.00 |
|
Sarel Spiking
Rollers
|
Three sizes of Aerator are available, 300mm (12"),
600mm (24") and 900mm (36") widths,
enabling a choice to be made to suit particular
requirements. Aids water / air penetration, stimulates
root growth, and for use when seeding.
Each Spiking Roller
section is 275mm (11") in diameter, calculated to
avoid 'tearing' of the turf. Each is fitted with 63
Tensile Steel Spikes 6mm (1/4") in diameter,
protruding 45mm for optimum surface aeration. Coupled to
each unit is a 115mm (4 1/2") diameter roller for
transportation across hard surfaces and for surface
rolling. (each tine is replaceable, held on with a
nylock nut).
Sarels may be pushed or pulled, depending upon ground
conditions, and depth of penetration required.
300mm (12") Wide
unit
This portable tool is the ideal for smaller lawns,
smaller areas of turf and where access is narrow. A comfortable and easy tool to use.
| Code |
Weight |
Spikes |
Price
£ (Ex VAT)
|
| 10030 |
30kgs (64lbs) |
63 |
399.00 |
600mm (24") Wide
unit
For use on Golf Greens, Bowling Greens, Tennis
Courts, Croquet Lawns, Larger Gardens etc. Fits through
most doorways.
| Code |
Weight |
Spikes |
Price
£ (Ex VAT)
|
| 10060 |
54kgs (120lbs) |
126 |
529.00 |
900mm (36") Wide
unit
For speedy aeration of larger Greens, Bowls, Cricket
Squares, Tennis Courts etc.
| Code |
Weight |
Spikes |
Price
£ (Ex VAT)
|
| 10090 |
80kgs (180lbs) |
189 |
659.00 |
Spare Spike (includes
Nylock nut)
Order code: 89010
Price (Ex VAT): £1.20
Towing Bracket &
Eye
Retrofits all models. Simply bolted on. Eye rotates
allowing for movement etc.
| Code |
Weight |
Price
£ (Ex VAT)
|
| 10010 |
3.5kgs |
65.00 |
|
|
Dragbrushes
and Dragmats
|
Dragbrushes
Heavy duty steel framework encloses stiff nylon
bristle heads, which are replaceable.
For use with top dressings, dew and wormcast removal,
grass grooming, ground clearance etc.
Brush widths are approximate and fully adjustable.
| Code |
Width |
Weight |
Price
£ (Ex VAT)
|
| 22040 |
4ft
(1.22m) |
4.30kgs |
95.00 |
| 22050 |
5ft
(1.52m) |
5.75kgs |
99.00 |
| 22060 |
6ft
(1.83m) |
7.15kgs |
105.00 |
| 22070 |
7ft
(2.13m) |
8.50kgs |
110.00 |
| 22010 |
Spare
brush section
14" (35cm) |
0.75kgs |
18.00 |
|
|
Dragmats
The only Dragmats constructed from stainless steel.
For use with top dressings, overseeding, grass lifting
prior to cutting etc. Supplied complete with Chain Bridle,
Handle, and connection Draw Bar. All roll up for storage.
The 9ft and 12ft wide models also come with a split,
reinforced drawbar, pull handle and a towing shackle. They
use two of the 3ft & 6ft widths combined.
Length of all Dragmats is approximately 4 ft (1.2m).
| Code |
Width |
Weight |
Price
£ (Ex VAT) |
| 21030 |
3ft
(0.92m) |
10.10kgs |
185.00 |
| 21060 |
6ft
(1.83m) |
19.30kgs |
275.00 |
| 21110 |
10ft
(3m) |
30.00kgs |
395.00 |
|
Spreaders
Key Features:
- Immediate on / off
control means the material can be applied accurately.
- Seperate Infinate
shutter control mechanism (between 0 and 20mm)
- Huge balanced hopper
holds approx 300 litres of material speeding up work
by reducing fill time.
- Dog clutch allows
agitator to be disengaged for easy movement when full.
- Stainless steel hopper.
- Pneumatic wheels on
quality bearings.
- High quality British
engineering.
|
Harvester MK II Dropspreader
The ultimate top dressing
machine, ideal for spreading loam, lawn dressing, greens
dressing, kiln dried sands, fertilisers, rubber crumb,
salt and much more.*
Easily controlled handle
trigger gives you immediate starting action with a quick
shut off when released. The range of settings (0-20mm)
allows the operator to achieve accurate controlled
spreading.
The hopper is constructed
from stainless steel. The rotary agitator is easily
switched on or off without material resistance.
*Please note, like all
dropspreaders this machine does not function well with wet
material.
| Code |
Weight |
Price
£ (Ex VAT)
|
| 35300 |
25kgs |
655.00 |
|
|
Supa-Spread model - FOUR
- Great general purpose
spreader
- 20kgs (40 lb) Hopper
Capacity
- Stainless steel hopper
- 8" Semi-pneumatic
Tyres
- Powder Coated Framework
- Enclosed Nylon Gears
- Solid Aluminum Axle
| Code |
Price
£ (Ex VAT)
|
| 35360 |
145.00 |
|
|
Supa-Spread model - SIX
- Medium to high use
spreader
- 30kgs (65 lb) Hopper
Capacity
- Polymer hopper
- 11" Pneumatic Tyres
- Sturdy Powder Coated
Frame & Stainless Steel Hardware
- Enclosed Metal Gears
- Solid Aluminum Axle
| Code |
Price
£ (Ex VAT)
|
| 35370 |
209.00 |
|
|
Supa-Spread model - EIGHT
- 50kgs (110 lb) Hopper
Capacity
- Heavy Duty Poly,
Spill-Proof Hopper Design
- 13" x 5"
Pneumatic Tyres
- Commercial Grade
Stainless Steel Framework
- Perfect Balance, Wide
Stance, Dual Handle
- Enclosed Metal Gears
- 16mm (5/8") Solid
Aluminum Axle
- Also great for winter
applications: Perfect for standard & mid-sized ice
melt and rock salt products
| Code |
Price
£ (Ex VAT)
|
| 35380 |
299.00 |
|
 RTM Slitters / Aerators |
Eco Slit: Tractor mounted slitter
Using a heavy duty three point linkage headstock, the deep aeration slitting tines provide surface opening and aeration for sportsfield, amenity and paddock areas.
We offer a choice of 1.4m or 1.7m working width models.
Rear roller kits are available as an optional extra.
Also available is a hydraulic transportable model for road transport use - working width of 2.5m - with tow bar and twin wheeled axle for narrow width site to site tractor towing. |
Spike: Mounted multi-tine aerator
A three-point linkage tractor mounted aerator of 1.8m (6ft) working width. It has three independant heads, and can be fitted with solid, hollow or chisel tines for sports turf use.
The 1830mm (72") working width is designed to cover the wheel width of most modern tractors, to prevent tramlining.
The unit is split into three independantly mounted drums, each on it's own bearing.
Tines offered: 12mm solid or hollow and chisel.
The tines are mounted 75mm apart and the maximum depth of penetration is 90mm.
Click here for RTM Product Range PDF brochure
|
| BEMAB BSL FLEXI Self-Loading Sand Spreader |
 |
Part of the Bemab range of products imported and distributed solely in the UK by STM, the BSL Flexi Sand and Salt Spreader self-loads saving time as well as being more efficient reversing the tractor into sand/salt to fill.
Volume and working width sizes available are : 200l - 900mm, 350l - 1100mm, 650l - 1300mm
The spreader, which is constructed of hot-dipped galvanised iron provides a long working life, dispenses the sand or salt either hydraulically or wheel powered off the tractor rear tyre, rotating the internal device which in turn dispenses the material evenly. The level of material to spread can be adjusted easily to your requirements.
This simple design and dispensing mechanism means less down time leaving more time spreading the vital material. |
|
The wheel of the BSL Flexi Spreader is driven by the tyre of the tractor to which it is mounted. The simple design provides an even consistency and easy maintenance. Hydraulic power option is also available. |
| The height to which the spreader is lowered to for loading can be adjusted easily to collect your material from a full pile to scraping the bottom. loading is done by lowering the spreader hydraulically and reversing into your material and at the same time raising the spreader with the hydraulics to obtain maximum efficiency. |
|
 |
POWEROLL Club is the most recent addition to the range. Designed to offer clubs the opportunity of owning a brand new wicket roller, but at a second hand roller price. So how do we do it? Simple! This is a no frills grass roller and we expect to produce many. High quality components are used throughout, many also used on the Poweroll 12, but there are fewer of them on this model thereby helping to reduce costs. Only 84” long and 42” wide, this roller is compact enough to fit into smaller sheds than most other heavy ride-on rollers. Despite its diminutive size however, remains within the I.O.G. guidelines for the ground pressure it displaces. Driver comfort remains a high priority so it uses the same luxury padded seat as all other Poweroll rollers and steering control from the Poweroll 12. A worm steering box is utilized so the steering control always feels positive (not vague like rollers with open gear wheels). |
| Other shared components with the Poweroll 12 including the rollers, front bogie assembly and bearings. Maximum weight is achieved by filling water ballast tanks built into the chassis and rollers. This roller is capable of producing a superb wicket; good enough for any standard of play. An ideal machine for rolling wickets or tennis courts. Tandem rollers are most welcome in part exchange against this brand new machine. A P.V.C. cover and scraper bars are available. |
 |
 |
 |
The POWEROLL 12 is suitable for all grounds rolling applications. As with all Poweroll rollers this machine has been designed with driver comfort in mind and is a real pleasure to drive. Used on sports grounds for play at all levels and abilities. A popular machine with cricket clubs, schools, colleges, lawn and clay tennis clubs, local authorities, plant hire Companies and Contractors. Useful also for anyone requiring their roller to be moved from site to site as without ballast when placed on a suitable trailer enables the machine to be transported with-in the 3.5 ton weight limit. The engine choices are either a Honda petrol or Kubota water-cooled diesel. Water ballast may be used in the front and rear rollers and water tanks situated above both rollers. |
| A useful full width locker box under the drivers feet can be converted to provide another water ballast tank if chosen at the time of purchase. The front roller is split to minimize ground damage when changing direction. When fully ballasted, this machine will produce ground pressure well in excess of the current I.O.G. recommendation for a heavy roller. The model 12 is the most popular in the Poweroll range; has many fleet operators and is used for all grass rolling applications. |
 |
| |
|
|
Groundsman Aerators
A range of pedestrian and tractor mounted Aerators for Hollow and Solid Tine aeration.
Championed by Bowls and Cricket Clubs the Groundsman Pedestrian aerator range offers the choice of four units.
Models 345MD / 345HD
GROUNDSMAN 345 Models are sealed bearing crank driven plunge action machines available in HD (heavy duty) and MD (medium duty) They are front wheel drive and have 3 tining arms and an operating width of 45cm (18 inches) They are fitted with a Honda 6.5hp petrol engine and 500x4 pneumatic tyres. |
 |
| Model 460HD
The GROUNDSMAN 460HD is a wider version of the 345 range. It has 4 tining arms and an operating width of 60 cm (24 inches) They are fitted with a Honda 8hp petrol engine and 650x6 pneumatic tyres. It is only available as a heavy duty version. |
 |
| Model 460SDR
The GROUNDSMAN 460 SDR is the top of the range pedestrian aerator. It has the same 4 arm heavy duty aeration mechanism as the 460HD but with two aeration speeds, rapid transport and power steering. Engine and tyres are the same size as the 460HD. |
 |
| Model 8120CTM
The GROUNDSMAN model 8120CTM is an 8 arm 120cm (48") swath compact tractor mounting machine. Minimum tractor requirement of 18 to 20 HP Its modular design uses two 4 arm heavy duty aeration units. This machine has been designed to accept the unique GROUNDSMAN Flexblade Core Collector attachment which enables you to Core and Collect in one pass. |
 |
| Model 12180TM
The GROUNDSMAN model 12180TM is a 12 arm 180cm (60”) tractor mounting machine. Minimum tractor requirement is 28 to 30 HP. As with the 8120, it is modular using four 3 arm heavy duty tining units. This machine can also be used to core and collect in one pass with the Flexblade collector attachment.
*All Groundsman pedestrian and tractor mounting aerators use quick change holders for a wide range of tines and patterns. See the GROUNDSMAN Tine and holder catalogue. |
 |
Groundsman Turf Cutters
Turf Multi Cutter TCHYD
The Groundsman TCHYD Turf Multi Cutter is a powerful multi purpose turf cutter developed primarily to power the wedge displacement trenching blades. The picture (right) shows the machine fitted with the Reel Insertion Attachment (TCPRIA) to insert irrigation pipe to a depth of up to 15cm in a one pass operation. Its compact size and narrow wheel base make it ideal for landscape projects which are unsuitable for larger equipment. This high traction workhorse is fitted with a 9HP engine and has a hydrostatic ground drive giving variable speed forward and reverse rapid transport. The cutter blade is engaged independently by a disc clutch. This machine lends itself to a host of operations and blade configurations to perform many operations including trenching as well as the regular turf cutting functions. The trenching function requires a very high traction to weight ratio. This has been achieved by incorporating a hydrostatic drive which allows the operator much more control to feed the power to all four wheels without slip or spin. Wheel weights can be attached to the front axle to increase grip without affecting the operator's ability to maneuver the machine. A differential has been incorporated for easy turning. |
 |
| TCCO Guillotine Chop-off Attachment
The TCCO Guillotine Chop-off Attachment is available for the TMC2 and TCDRB turf multi cutters.
This power-driven attachment chops the cut turf (sod) to precision pre-set lengths for easy handling and re-turfing work. |
 |
Turf multi Cutter TCDRB
The Groundsman TCDRB is a four wheel drive precision turf cutter with exceptional traction and operator comfort. The machine has been designed for precision cutting of turf for relaying. Blades are available for cutting 12, 14, 16 and 18 inch wide sod and a guillotine attachment is available. The rear mounting blade position gives easy access and visibility for cut alignment and the cross-blade is positioned directly under the rear wheels for consistent depth of cut in rolling terrain without lots of ground clearance. Center mounting mole drain and soil de-compactor and trench cutting blades to 12cm (5") working depth give the TCDRB even more versatility. |
 |
Model TMC2
The TMC2 Turf Cutter has been specifically developed for general purpose sod-cutting and is particularly aimed at the hire and landscaping trades. The machine uses an oil filled gearbox ground-drive and the same synchro belt crank drive and blade mechanism as the extremely successful TCDRB machine. It incorporates a host of features such as independent blade and ground-drive clutches for safe loading and transport plus quick-set hand-lever controls for all settings including the depth.
EXTREMELY DURABLE AND LOW MAINTENENCE
EASY TO OPERATE WITH LOW VIBRATION
HIGH TRACTION AND CLEAN CUTTING
COMPACT AND PORTABLE
The machine is smooth in operation, balanced and ground-drive traction is exceptional due to the central axle and blade position. Visibility is good for cut alignment and blades are available for 12, 14, 16" and 18" wide cuts. |
 |
TURF CUTTER ACCESSORIES
Sod cutting blades are available for all models in 30cm (12”) 35cm (14”) 40cm (16”) and 45cm (18”) wide cut. The TCDRB uses four widths of rear wheels (blade wheels) to suit the blade width. This system gives the machine maximum traction and stability for the blade selection. The TCDRB can also accept centre mounting trench, mole-drain and de-compactor blades for a working depth up to 13cm (5”) are available plus a guillotine chop-off attachment for the TCDRB machine. The TMC2 can accept the full range of sod blades plus central mounting trench, mole drain and de-compactor blades to a maximum working depth of 8cm. |
 |
Linesman
Sports Pitch Markers
Linesman Line Marker
|
LINESMAN LINE MARKER
- Traditional type Football and Rugby Marker - 2" or 3" Marker Wheels - 3 Gallon Tank, solid or pnuematic wheels excellent value from £325.00 + vat.
|
Prince Line Marker
|
PRINCE LINE MARKER
- Choice of 1 1/2" to 4" Marker wheels, 3 gallon tank, solid or pneumatic wheels - from £350.00 + vat
|
Dimple Line Marker
|
DIMPLE LINE MARKER
- Heavy Duty Traditional type general line marker - Football, Rugby, General sport - 2" or 3" solid or pneumatic wheels - from £425.00 + vat
|
Seed
Slotters
|
 Used for overseeding worn areas etc on all fine turf
areas. The rotary unit will not tear up the surface and
correct depth is obtained by the rotary stops at each end
of the slotter reel. The static units can also double
as 'tampers', with their heads removed. The spiker units
are also used for aeration. By
providing a flat bottomed slot at the correct optimum
depth of 1/2" (13mm approx), the seed 'turns' during
the rapid germination period of less than 7 days. Moisture
in the soil is more easily absorbed by the seed,
encouraging stronger root growth, within a protected
environment. Much of
the seed employing the traditional surface application is
simply wasted. Birds, washing, lack of moisture and low
spots account for huge failures in germination.
|
 
Rotary Hand Seed Slotter
| Code |
Weight |
Price
£ (Ex VAT)
|
| 35010 |
5.7kgs |
169.00 |
Rotary Hand Spiker
| Code |
Weight |
Price
£ (Ex VAT)
|
| 35020 |
5.6kgs |
169.00 |
Static Spiker (25 Spikes)
| Code |
Weight |
Price
£ (Ex VAT)
|
| 35040 |
3.4kgs |
99.00 |
| 89010 |
Spare spike + Nylock
Nut |
1.60 |
Static Seed Slotter
| Code |
Weight |
Price
£ (Ex VAT)
|
| 35030 |
3.45kgs |
99.00 |
|
Turf
Doctors
|
Hexagon Turf Doctor
This tool cuts hexagonal shaped pieces of turf 7"
(18cm) across, to a depth of 3-4" (8-10cm). By using
bodyweight either standing or jumping on the tool no other
equipment is required.
A very quick and effective
way of turf removal, as several of the cut segments will
stack in the tools 'magazine' allowing for continuous
operation and transportation from one area to another.
Replaced segments create an attractive honeycomb effect.
Recovery is quick and effective. The bottom of cut
segments can be 'scalped' to ensure squareness when
replacing.
| Code |
Weight |
Price
£ (Ex VAT)
|
| 15200 |
5.3kgs |
139.00 |
|
|
Turf Doctor 9" (23cm)
Removes 9" (23cm) pyramid shape squares of turf
sod.
Repaired areas can be played on straight away, because of
the deep extraction taken.
Each sod is cut exactly square and fits quickly and neatly
into every exchange hole. A complete repair can be made
with no gaps left between sods.
The true surface level is maintained.
The playing surface remains firm and stable as each sod is
held firmly in place by wedges of undisturbed soil. There
is minimal root loss and recovery is very quick.
| Code |
Weight |
Price
£ (Ex VAT)
|
| 15090 |
9.1kgs |
159.00 |
| Spare
9" Blade |
| 15095 |
4.7kgs |
40.00 |
|
Levelawns
& Lutes
|
BMS manufacture a full range
of Levelawns (or Lutes) for use on fine turf areas. The
smaller being ideal for general grading and leveling work,
whilst the larger are used to remove even the slightest
undulations when used correctly.
All models are supplied
complete with a handle ready to use.
|
|
28" Flip Over
A high quality general purpose lute, designed for
tough all purpose work. Constructed from heavy gauge steel
angle with a 'flip-over' design allowing for the initial
spreading of material. It is then easily rotated onto its
sharper face for rubbing dressings etc into the turf
suitable for use on most fine turf areas, and preparation
sites.
| Code |
Weight |
Price
£ (Ex VAT)
|
| 30280 |
6.30kgs |
79.00 |
|
36" (92cm) Levelawn 'Greenkeeper
B'
The lightweight but strong design of the greenkeeper
lutes makes them ideal for spreading screened top soil,
sand based dressings and other such materials. CNC
designed from sheet steel which purposely maintains slight
flexibility in the tool to help when following minor
contours of golf greens etc, without causing scars.
| Code |
Weight |
Price
£ (Ex VAT)
|
| 30360 |
6.30kgs |
79.00 |
|
40" De-Luxe Lute
Slightly more robust than the green keeper lute,
designed to handle larger jobs due to its extra width.
Constructed from tough box section steel to maintain
stiffness, extra strong end braces help maintain the level
of this tool. Ideal for most general leveling tasks.
| Code |
Weight |
Price
£ (Ex VAT)
|
| 30400 |
4.55kgs |
85.00 |
|
|
4ft Superub
The ultimate single user leveling tool. The Superub
produces a very flat surface due to its wide 4ft (1.2m)
width. Constructed from large box section and strongly
braced to maintain its accuracy, this tool is ideal for
finishing the perfect level on most fine turf surfaces.
Supplied complete with a single user handle. Also
available with a continuous loop handle, whereby two
people can use the tool in conjunction if required, or if
simply a more comfortable handle is required for prolonged
use.
| Code |
Weight |
Price
£ (Ex VAT)
|
| 30480 |
7.30kgs |
99.00 |
|
Optional Loop Handle for
4ft Superub
| Code |
Weight |
Price
£ (Ex VAT)
|
| 32240 |
2.55kgs |
39.00 |
|
Large
Levelawns
|
The Larger BMS Levelawns have
been designed for use on many fine turf areas, such as
bowling greens, croquet lawns, lawn tennis courts etc,
during ongoing programs of maintenance.
The inner bars of the 2
& 3m Levelawns serve to help spread top dressing
material, followed by fine leveling with the rear channel
of the frames. The inner bars are adjustable, ideally set
1-2mm above the level of the outer channels. Because of
the high accuracy in their manufacture, correct use will
reduce undulations on playing surfaces to at least 6mm
(1/4") or less.
The Jumbo Levelawn is the
ultimate all round leveling tool. Supplied in two 6ft
(1.83m) wide sections which may be used individually to
start with, then coupled together to form the 12ft (3.7m)
wide tool to produce a superior finish on any flat
surface.
|
|
2 Metre Wide Levelawn
| Code |
Weight |
Price
£ (Ex VAT)
|
| 32020 |
22.50kgs |
285.00 |
3 Metre Wide Levelawn
| Code |
Weight |
Price
£ (Ex VAT)
|
| 32030 |
34.50kgs |
385.00 |
Jumbo 3.7 Metre (12ft)
Wide Levelawn
| Code |
Weight |
Price
£ (Ex VAT)
|
| 32120 |
50.00kgs |
545.00 |
|
Corer
Collector
 Designed
for Aeration / Soil Coring providing assistance with
irrigation, seeding, de-compacting areas, to aid root
growth etc.
The clever yet simple
design that makes the tool unique is the collection box,
which catches all of the crumpling remnants that eject
through the five 4" x 1/2" (100 x 12.7mm)
replaceable hollow tines, leaving no mess to clear up!
 The
Corer Collector can be disassembled allowing for tine
change (solid tines available), or to allow fewer tines in
exceptionally compact ground.
5 Tine Corer Collector
complete with Hollow Tines
| Code |
Weight |
Price
£ (Ex VAT)
|
| 10200 |
3.80kgs |
95.00 |
Hollow Tine - each
| Code |
Price
£ (Ex VAT)
|
| 10210 |
9.95 |
Solid Tine - each
| Code |
Price
£ (Ex VAT)
|
| 10220 |
10.00 |
|
Weasel
& Hedgehog
Weasel
The Weasel is designed for de-compacting, and breaking
up soil into a tilth, both for cosmetic reasons, allowing
in air and moisture, or for use when re-seeding damaged or
worn areas. Also ideal for use around the edge of compact
sand bunkers.
| Code |
Weight |
Price
£ (Ex VAT)
|
| 35100 |
1.80kgs |
79.00 |
Hedgehog
The Hedgehog is designed for use with localised
aeration of fine turf, and for overseeding. Although the
design of both tools are very similar they are both very
well suited to completely different applications.
| Code |
Weight |
Price
£ (Ex VAT)
|
| 35110 |
1.80kgs |
79.00 |
|
|
Turf
Slitter
|
A highly effective tool for
replacing, renewing, repairing or simply lifting turf
quickly and easily.
Depth of cut is kept
constant by the two skids either side of the tool, which
allows equal replacement of extracted turf.
Cut Depth / Width:
1.25" (3.2cm) / 4.25" (12cm)
| Code |
Weight |
Price
£ (Ex VAT)
|
| 15010 |
1.85kgs |
69.00 |
|
|
|
|
Couplings
From top left,
| Code |
Description |
Price
£ (Ex VAT)
|
IR3445
IR3465
IR3485 |
Hose
Quick Coupling 1/2"
Hose Quick Coupling 3/4"
Hose Quick Coupling 1" |
2.95
3.25
3.77
|
IR344M
IR346M
IR348M |
Threaded
Quick Coupling 1/2" Male Thread
Threaded Quick Coupling 3/4" Male Thread
Threaded Quick Coupling 1" Male Thread |
2.95
3.25
3.75
|
IR344F
IR346F
IR348F |
Threaded
Quick Coupling 1/2" Female
Thread
Threaded
Quick Coupling 3/4" Female
Thread
Threaded
Quick Coupling 1" Female
Thread |
2.95
3.25
3.75
|
| IR3850 |
Quick
Coupling 1/2" Hose Adaptor |
4.45
|
| IR3870 |
Quick
Coupling Blanking End Plug |
4.45
|
| IR3890 |
Quick
Coupling 'Y' Piece |
11.50
|
IR3448
IR3468
IR3488 |
SZ16
Hose Clamp (10 pack) 1/2"
SZ25 Hose Clamp (10 pack) 3/4"
SZ30 Hose Clamp (10 pack) 1" |
7.90
8.90
9.90
|
|
|
Professional Sprinkler Head
Heavy duty metal construction for prolonged use. Part
or full circle operation with stainless steel springs and
axle pin. Easy to adjust with fingertips to any sector of
circle required.
Nozzle diameter: 3.9mm
Female 3/4" BSP pipe fitting
Order Code: IR3635
Price (Ex VAT): £34.00
| Pressure (bar) |
Flow per hour (m³) |
Diameter of cover (m)
|
| 2.0 |
0.87 |
27m
|
| 3.0 |
1.06 |
29m
|
| 4.0 |
1.22 |
31m
|
|
|
Metal Sled Base Frame
Heavy duty powder coated metal frame provides a very stable base for our
sprinkler head. The non restricting 3/4" bore comes complete with snap
coupling to fit quickly onto you hose supply.
Order Code: IR3615
Price (Ex Vat): £22.50
|
|
Heavy Duty Hose Trolley
A huge heavy duty trolley capable of holding up to 120m of
3/4" (19mm) Hose. Or up to 80m of 1" (25mm)
Hose.
Complete with quick coupling for fast connection to your
supply.
Ask about mounted versions.
Order Code: IR3400
Price (Ex Vat): £249
Ticoflex Hose
| Code |
Description |
Price
£ (Ex VAT)
|
| IR3430 |
50m Tricoflex hose
1/2" (12.5mm) |
49.00
|
| IR3450 |
50m Tricoflex hose
3/4" (19mm) |
85.00
|
| IR3460 |
100m Tricoflex hose
3/4" (19mm) |
165.00
|
| IR3470 |
50m Tricoflex hose
1" (25mm) |
135.00
|
| IR3480 |
100m Tricoflex hose
1" (25mm) |
265.00
|
|
|
Water Aplication
From top,
The Aquatine
For injecting directly into hydrophobic areas. Can
also be fitted with a modified drencher pellet bowl for
use with wetting agent pellets etc. Constructed to the
highest standards.
| Code |
Description |
Price
£ (Ex VAT)
|
24010
24070
24015 |
Aquatine
Aquatine Optional Wetting Agent Bowl
Spare Aquatine Tines (set of 4) |
129.00
59.90
40.00
|
Drencher Pellet Gun
For applying the Drop & Go Pellets.
Flow rate and pellet usage controlled by valve position
and will vary depending upon your supply pressure.
Available with the preferred heavy duty flat nozzle or
optional rose attachment for lower pressure usage.
| Code |
Description |
Price
£ (Ex VAT)
|
| 24030 |
Drencher Pellet Gun
with Flat Nozzle |
125.00
|
| 24035 |
Drencher Pellet Gun
with Rose Nozzle |
125.00
|
Drop & Go Wetting
Agent Pellets
For effective treatment of dry patch, hard to reach
areas, high spots and such like. To be used with our
Drencher Pellet Gun. Each pellet treats approx 1,000 -
1,500m².
| Code |
Description |
Price
£ (Ex VAT)
|
| 24075 |
Drop & Go
Wetting Agent Pellets |
69.50
|
|
|
